What to do with EAC Disconnect Rust: instructions for use. Launch error Easy Anti Cheat is not installed - what to do Problems with easy anti-cheat

Preface

This guide is an extension of the guide below. Before you look for a solution to your problem, review general recommendations from this guide:

I will ask:
Do not ask for help under the comments of this guide if you have not found a solution to your problem (it’s just inconvenient to have a conversation here), do not add me as a friend and leave comments on my profile for personal advice on your issue.

EasyAntiCheat (EAC) Driver Enforcement Error

EasyAntiCheat (EAC) driver control error

Error Code 2, Error Code 3

The errors are caused by the fact that the anti-cheat client was unable to establish a connection with the EAC server.
The reason may be: a problem on the EasyAntiCheat server side, a game block (ban), programs that block your ports, an error in the anti-cheat itself.

There is no single way to fix the problem. The solution is individual for each user.

In some cases, checking the game cache helps.
- The game can start without error after multiple restarts (on the 15-20th attempt).
- Check your system files for errors.
Sometimes, corrupted internal OS library files can cause problems with the game.
- Follow the path:
"\steam\steamapps\common\
Find the Dead by daylight folder. Uninstall it and reinstall it.
- Defragment your hard drive.
- Completely format your hard drive and complete the installation.
- Install the game on another hard drive.
- Some players believe that the problem occurs due to a conflict between the anti-cheat and some RAM. Perhaps replacing the RAM will help you solve the problem.

Many players find it helpful to remove all cryptographic utilities, such as: CryptoPro.

ERROR_GEN_FAILURE

The error appears because your system is unable to load the kernel mode driver. Possible reasons may be: blocking the boot driver, various viruses, old anti-virus installations that could not be removed.
It is recommended to completely reinstall Windows.

(1056) ERROR_SERVICE_ALREADY_RUNNING

The error occurs because the EasyAntiCheat process is already running.
Open the task manager and close the Dead by Daylight and EasyAntiCheat.exe processes, or restart your PC.

The error occurs because the EasyAntiCheat service is disabled.
To enable it, hold down the Win + R keys. Type “services.msc” (without quotes) into the text box and click Run. Find "EasyAntiCheat" in the list, click it right click mouse, click "Properties", then in "Startup Type" change "Disabled" to "Manual" and click "OK" and close the "Services" list.

(5) ERROR_ACCESS_DENIED
(1053) ERROR_SERVICE_REQUEST_TIMEOUT
(1058) ERROR_SERVICE_DISABLED
(1450) ERROR_NO_SYSTEM_RESOURCES
NETWORK ERROR CAN NOT CONNECT TO EASYANTICHEAT NETWORK

Connect the Internet cable “directly” to your computer, not through Wi-Fi or a router.

The fight against the use of cheats and other software that gives the player an advantage is one of the important components of all games with multiplayer, as well as a kind of sign of quality. To ensure the proper level of security, developers use special solutions without wasting time on creating the product themselves. Such services prevent the game from running when any suspicious software is running, which, in turn, sometimes becomes a problem even for honest players. This material will discuss the following error: EasyAntiCheat is not installed. This startup error is currently most common in Paladins, Rust, and Friday The 13th games.

What kind of anti-cheat is this?

EasyAntiCheat (aka EAC) is a popular service that uses hybrid anti-cheat protection technologies based on a combination of server and client data analysis. It is used on many modern products, including online games. Despite the reliable protection, players, in most cases, do not experience discomfort from the service, which makes this software attractive to developers.

The list of games containing this option is quite large. Here are some of them: 7 Days To Die, Infestation, Ghost Recon,Warface, Watch Dogs 2, RoboCraft and Online Games. Unfortunately, the error appears even when playing offline. Let's talk about how to fix it.

Fixing the problem

First of all, we recommend reading the FAQ section on the service website. Popular problems and their solutions are described here. In our case, you can act in several ways. Attention! Be sure to disable your antivirus and Windows Defender while fixing the error!

Checking the cache.

In case of malfunctions and file corruption, this method is good because the system itself checks the necessary files, and if they are missing, downloads them. For Uplay, the procedure is identical. Afterwards, try running everything as administrator (both the game and Steam).

Solution to startup error by reinstallation

Note: For offline play, simply uninstalling the service may be helpful.

Another reinstallation method for the solution EasyAntiCheat is not installed

1. Remove anti-cheat.
2. Uninstall DirectX and Microsoft Visual C++ 2005, 2008, 2010, 2012, 2013, 2015.
3. First reinstall the removed components of both bit versions (x86 and x64), reboot, and then install Anti-Cheat itself using the method indicated above.
4. Reboot.

If the measures did not help, then you need to reinstall the game and all necessary components.

The following steps will not be superfluous

The described manipulations help fix the problem with this anti-cheat in most cases. However, if this does not happen, you need to contact the support of the game itself and EAC, where you describe the problem in detail.

Conclusion

Often, EAC is not installed launch failure occurs due to updates to the system, game, or service itself. To prevent this from happening, you can disable automatic updates. Of course, if this has already happened, then you can use update rollback, which is often in a good way getting rid of the error. In the future, you can return the function, because the developers will prepare an adaptation. Please indicate in the comments which method helped you.

I would like to draw your attention to anti-cheat, and actually ask about the possibility of replacing Myac with EAC.

Here's a little about him:

In this topic we will look at the EAC (Easy Anti Cheat) anti-cheat. Since there isn’t really a Russian FAQ there, we will try to put together all the information we know. First, let's talk about the program - this anti-cheat is, perhaps, one of the best and constantly updated anti-cheats, which is used on many popular servers, including in the cyber arena. Easy Anti Cheat is a client-server program, so using it on your server is only possible by purchasing a license, which will cost those who wish to:

50 game servers - 75 euros / month.
100 game servers - 125 euros / month.
150 game servers - 175 euros / month.

IN this moment EAC supports the following games:

Counter-Strike 1.6
Counter-Strike: Source
Counter-Strike: ProMod
Team Fortress 2

Possibilities:

Memory scanning, checksum checking, anti aimbot, kernel access blocking and much more
- Improved system for taking game screenshots
- Protection against reverse engineering
- Online player statistics
- Prevent replacement of sprites and sounds
- Forced installation of 32-bit textures for all players (Counter-Strike 1.6)

Setting up and running EAC

First, let us remind you that EAC only works with servers where the program license is installed. You will not be able to use this anti-cheat, for example, when playing on your own server. After downloading EAS, you will see one EXE file, you need to run it. Since EAC is a portable program, no installation is required.

The correct sequence of actions for successful integration of the EAC:
Steam launch
Launch of EAC
Launching CS/CS/CS/TF2

After launching EAC you should see a window like this:

You will see a list of servers available for connection. To select, simply click once on the corresponding icon and Easy Anti Cheat will display information about the number of people playing on the server. After this you can start the game.

Problems and their solutions

1) Problem: I have one of the following errors:
- Every time I launch the client, it asks me to update and nothing happens
- Anti-cheat does not start at all!
- I have problems with initialization when starting the game
- My game freezes if I run EasyAntiCheat!

1) Solution: Some antiviruses and/or firewalls prevent EAC from working properly.
There are antiviruses that recognize EAC as malware, and this is not strange since the anti-cheat scans memory and is introduced into game processes for control. If your antivirus blocks EAS, try disabling it for a while, download EAS and run it, then resume the antivirus. The same goes for a firewall - it can block the ports that EAC uses to connect. Try disabling it while EAC is starting. An alternative to disabling the antivirus/firewall is to add EAC to the trusted or allowed list.

2) Problem: Already when starting the game, Easy Anti Cheat gives the following error:
"Error getting required access privileges!
Please run Steam as administrator."

2) Solution: For Windows 7 64bit, sometimes you need to run Steam with administrator rights.
First, close Steam, right-click on the shortcut and select "Properties"
In properties, open the "Compatibility" tab and at the very bottom, check the box next to "Run this program as an administrator." Click OK.

3) Problem: After I run Steam as an administrator, Ventrilo/TeamSpeak/Mumble does not work for me!
3) Solution: In order for these programs to be able to use hotkeys, run them as administrator too.

4) Problem: I updated my antivirus and now it detects Easy Anti Cheat as a virus!
4) Solution: As we wrote above, due to the specifics of the EAC, antiviruses give false alarms.
Either disable the activator while EAC is starting, or add an exception for EAC in the antivirus settings.

5) Problem: Every time you start EasyAntiCheat, it asks you to download the latest version, but I have downloaded the latest one!
5) Solution: Your browser may be downloading the client from a saved copy in the cache
Clear temporary browser files.

6) Problem: Message on the server: Easy Anticheat not enable on server.
6) Solution: The EAC server does not immediately take control game server, since EAC is a client-server program and this process takes some time. You just need to wait a few minutes.

Anyone who knows what EAC is, please unsubscribe too
It really works, bypassing EAC is much more difficult and expensive, one might say almost impossible!

Thank you in advance!

Rust is a popular multiplayer survival game that tells the story of people trapped in a secret experiment. They must survive on a remote, lifeless island where they can do anything to get food, build a house, and protect themselves from aggressive neighbors. The game project received recognition from the gaming community, but did not remain an ideal entertainment option, as many players encountered problems of various kinds. For example, very often users wonder what to do with EAC Disconnect Rust? This error began to appear frequently when updating the game client and introducing special protection against cheaters. As it turned out, the problem itself is not so serious, however, to solve it, you need to consider options with licensed and pirated versions of the game.

What is this error?

But before we look at what to do with EAC Disconnect Rust, we need to look at the problem itself. This is due to the fact that the anti-cheat program does not interact with the computer and conflicts with some programs. This happens quite often, and developers immediately try to solve this problem. But in our case, this is not so easy to do, since Rust is a complex development, and sometimes similar problems occur among individual users, and not everywhere. This is due to the features of Windows, the version of the game, as well as the programs that the user uses. Therefore, in order to understand in detail what to do with EAC Disconnect Rust, we offer you two instructions at once that will help you get rid of the annoying error.

How to fix a bug in the licensed version of the game?

A licensed version of the game is a copy of the entertainment that was purchased for money and using a modern gaming Steam platforms. As a rule, errors appear extremely rarely in such versions of gaming entertainment, but they still remind us of themselves. Therefore, to figure out what to do with EAC Disconnect (Unconnected) Rust, having a licensed version of the game, just follow these steps:

1. First remove game project. To do this, just go to the “Library” item in Steam, select the game, right-click and select “Delete”. After a few minutes, the game will be uninstalled and you can begin installing it.
2. To install, go again to the “Library” item in Steam, select the game and click on the “Install” item, which will appear on the right side of the window.
3. Before you start the entertainment, you need to disable your antivirus. Call the “Task Manager” by pressing the Ctrl+Alt+Delete buttons, select the “Processes” section, look for the required item with the name of the antivirus, right-click and click on the “End process tree” item.
4. Once all the steps are completed, you can start the game. Just keep in mind that for comfortable game Every time before starting you need to perform all the above steps.

How to fix a bug in a pirated version of the game?

If users use a pirated version of the entertainment, then they are wondering: what to do with EAC Disconnect Rust No Steam. As you can see, the name of the error is slightly different, but it has an identical structure to the error we are considering. Therefore, to get rid of it, we suggest following these steps.

1. First, make sure you are running the game without Steam.
2. Close it if you have it running.
3. Go to the directory with the installed files and use the EasyAntiCheat folder.
4. In it, run the EasyAntiCheat_Setup.exe file and select Uninstall.
5. After completing the steps, you should restart your computer and start the game again without Steam.

If the error does not disappear, then you should perform additional steps to create a new user:

1. Open the “Windows Control Panel”. This can be done using the Windows button at the bottom left. An additional window will open, and in it you need to select the “Control Panel” item. If you are using Windows 10, then you just need to look for the gear icon.
2. After that, go to the “User Accounts” section.
3. Next, use the item “Manage another account/Create a new one” account».
4. Enter the name of the new profile, using only english letters, then select the account type “Administrator”.
5. All that remains is to use the “Create an account” item.
6. Now go to the directory with the installed game.
7. We look for a file called Launcher.exe, hold down Shift and right-click on the icon. After that, in the context menu that opens, select “Run as another user.”
8. In the window that appears, enter the name and password of the account you created and click OK.
9. After all the steps have been completed, the game will start working.

What could be the consequences?

Now you know what to do with EAC Disconnect Rust, but it's worth thinking about how this might affect the actual gameplay. If you are using a licensed version of the game, the anti-cheat is not removed and no consequences arise. But if you use a pirated version of the game after removing EAC, be prepared that many cheaters will appear on the servers who will fraudulently destroy you, rob you, and you will not be able to do anything about it. Therefore, we strictly recommend using only the licensed version of the game, so as not to spoil your impressions of the game and have protection from cheaters. At the moment, the cost of Rust on Steam is only 419 rubles.