The splinter cell blacklist service is unavailable, what should I do? Splinter Cell Blacklist crashes, won't start, slows down, and gives an error. What to do? Controls don't work in Tom Clancy's Splinter Cell Blacklist
After installing the components, restart your computer.
2. If the above did not help, then run the game as a system administrator and in compatibility mode for Windows Vista SP 1.
3. Check that the path to the game does not contain Cyrillic characters. Otherwise, reinstall the game.
4. During installation, disable your antivirus program.
If all else fails, you can change the crack or, as a last resort, a repack.
If Splinter Cell: Blacklist does not start after installing the update, then:
License: 1. Delete the folder C:\Program Files (x86)\Ubisoft\Ubisoft Game Launcher
2. Install the uPlay client again
Pirate copy: 1. Install a crack for the version of the installed update.
If you get an error at startup, try running the game in windowed mode. To do this, correct the file VideoSettings.ini. Read about how to do this a little lower on the page.
The same should be done if an error appears Run Out of Memory Error.
Tom Clancy's Splinter Cell: Blacklist crashes
If you also have Tom Clancy's Splinter Cell: Blacklist crashing on your desktop, then this part of the material is especially for you. Below we will look at the steps to fix crashes in the game. It is not necessary to complete all the steps if crashes occur in Tom Clancy's Splinter Cell: Blacklist will stop, we can stop here.
1. Reduce graphic settings in Tom Clancy's Splinter Cell: Blacklist, or better yet, turn off all options, and set what is not turned off to minimum.
Separately, we note: try switching the vert value. synchronization to the opposite position to the one you had before.
2. Update your video card drivers
With the release of games of this level, it is recommended to update the drivers for your graphics card. New drivers are needed to optimize the operation of the game on the computer and eliminate errors and crashes associated with the display of actions on the screen.
3. Install DirectX
4. Increase the swap file
This point is especially relevant for players whose computers are not equipped with multi-gigabyte RAM. The game is quite demanding on resources, so we recommend that you increase the page file. If you don't know how to do this, read.
5. Sometimes Tom Clancy's Splinter Cell: Blacklist crashes due to a large number of running programs. Try to turn off all programs and third-party applications not used in the game.
6. Try running the game in windowed mode. To do this, you can change the file C:\Users\User\Documents\Ubisoft\Blacklist\VideoSettings.ini
Find in the file WindowStyleFinal = 1 and change 1 to 0 here.
If you get an error Cannot Load Resource Files, rename the game folder using only Latin characters.
I'm having trouble connecting to multiplayer in Splinter Cell Blacklist, what should I do?
ANSWER:
If you are having trouble connecting to a multiplayer game, try the following solution:
Firewall
Start by updating your antivirus or personal firewall that may be installed on your computer.
To update and define software like ZoneAlarm, Norton AntiVirus/Internet Security, McAfee, Avast, etc. , contact the software manufacturer.
Also, be aware that Windows Firewall (which can be accessed through the Control Panel, as shown below) may block the game's connection to the Internet. For recommendations on how to update Windows (highly recommended), please see
Opening Windows Firewall from Control Panel
If updating these programs does not solve the problem, you may need to configure the software to allow access to a specific application. This action is performed through a list of exceptions (may be called differently, depending on your software). When adding a game as an exception, do not forget to add an executable file (EXE), both for the game and for Uplay.
Network ports
If it is not possible to disable the firewall, you need to route the network ports below to your computer's IP address for the best possible connection:
Game Ports:
TCP: 80, 443
UDP: 3658, 13000-13032
Uplay PC:
TCP: 80, 443, 14000, 14008, 14020, 14021, 14022, 14023 and 14024.
Network Port Forwarding Example
Instructions for setting up network ports are specific to the software used and can be found on the manufacturer's web page. You can also check out free resources such as Port Forward for tips. Please note that this site is not affiliated with Ubisoft.
Background applications
You may also encounter problems caused by applications running in the background on your computer. During playback Ubisoft games Please remember to close all running background applications before starting the game.
Read and follow the steps listed in the instructions:
Open the Start menu, search for Run (Win XP), Start Search (Win Vista), or Search for Programs and Files (Win 7)
- Remove all information from the ticker and enter the word MSCONFIG. Press ENTER to open the System Configuration Utility
- Look through the list of startup items (not the Startup tab) and select the Selective startup option (if it's not already selected) (If you don't see this feature, make sure you click on the "General" option at the top of the window)
- Once you have clicked on "Selective startup", uncheck "Load startup items"
- After completing this step, click "Apply" and "OK", then restart your computer
Disabling startup items using Msconfig
*Keep in mind that this is only a temporary solution and any changes can be undone by returning to MSCONFIG and re-selecting Normal Startup*
HOST files
The host file is a small text file that is part of operating system Windows. The host file can be used to route traffic, and sometimes block a website.
Clear your HOSTS file to eliminate the possibility of blocking access to a multiplayer game. The easiest way to clean up your HOSTS file is to click on the Fix it button in the Microsoft article, which can be found
Traffic throttling / Blocked ports
You may encounter restrictions from your Internet Service Provider (ISP). If the problem connecting to multiplayer is not resolved, contact your Internet provider for additional information about any specific restrictions placed on the previously mentioned network ports.
The problem is not solved?
If, after completing the above steps, problems remain, please contact Full description Your problem, including any error messages you received.
I'm having trouble connecting to multiplayer in Splinter Cell Blacklist, what should I do?
ANSWER:
If you are having trouble connecting to a multiplayer game, try the following solution:
Firewall
Start by updating your antivirus or personal firewall that may be installed on your computer.
To update and detect software like ZoneAlarm, Norton AntiVirus / Internet Security, McAfee, Avast, etc. , contact the software manufacturer.
Also, be aware that Windows Firewall (which can be accessed through the Control Panel, as shown below) may block the game's connection to the Internet. For recommendations on how to update Windows (highly recommended), please see
Opening Windows Firewall from Control Panel
If updating these programs does not solve the problem, you may need to configure the software to allow access to a specific application. This action is performed through a list of exceptions (may be called differently, depending on your software). When adding a game as an exception, do not forget to add an executable file (EXE), both for the game and for Uplay.
Network ports
If it is not possible to disable the firewall, you need to route the network ports below to your computer's IP address for the best possible connection:
Game Ports:
TCP: 80, 443
UDP: 3658, 13000-13032
Uplay PC:
TCP: 80, 443, 14000, 14008, 14020, 14021, 14022, 14023 and 14024.
Network Port Forwarding Example
Instructions for setting up network ports are specific to the software used and can be found on the manufacturer's web page. You can also check out free resources such as Port Forward for tips. Please note that this site is not affiliated with Ubisoft.
Background applications
You may also encounter problems caused by applications running in the background on your computer. When playing Ubisoft games, please be sure to close all running background applications before playing.
Read and follow the steps listed in the instructions:
Open the Start menu, search for Run (Win XP), Start Search (Win Vista), or Search for Programs and Files (Win 7)
- Remove all information from the ticker and enter the word MSCONFIG. Press ENTER to open the System Configuration Utility
- Look through the list of startup items (not the Startup tab) and select the Selective startup option (if it's not already selected) (If you don't see this feature, make sure you click on the "General" option at the top of the window)
- Once you have clicked on "Selective startup", uncheck "Load startup items"
- After completing this step, click "Apply" and "OK", then restart your computer
Disabling startup items using Msconfig
*Keep in mind that this is only a temporary solution and any changes can be undone by returning to MSCONFIG and re-selecting Normal Startup*
HOST files
A host file is a small text file that is part of the Windows operating system. The host file can be used to route traffic, and sometimes block a website.
Clear your HOSTS file to eliminate the possibility of blocking access to a multiplayer game. The easiest way to clean up your HOSTS file is to click on the Fix it button in the Microsoft article, which can be found
Traffic throttling / Blocked ports
You may encounter restrictions from your Internet Service Provider (ISP). If the multiplayer connection problem is not resolved, contact your Internet service provider for more information about any specific restrictions placed on the previously mentioned network ports.
The problem is not solved?
If, after completing these steps, you still have problems, please contact us with a full description of your problem, including the error messages you received.
The game Splinter cell blacklist is an excellent shooter that surprises with its graphics and plot. But it also has many disadvantages. The disadvantages are a large number of bugs, glitches and errors. Why the developers don’t eliminate them is probably of interest to everyone. But thanks to advanced programmers and particularly smart gamers, some problems can still be solved. Today, we’ll look at one of them, during which the game simply crashes, reducing all chances of passing to zero.
First solution to the problem
As soon as you notice systematic crashes of the game, do not waste time in the hope that everything will pass, this does not happen. Better yet, do the following to solve the problem:
- Find a file called “VideoSettings.ini” in the game directory;
- Open this file using the standard Notepad program or download “N otepad++»;
- Change the line "WindowStyleFinal=1".
That is, the change must be made to the value itself, after the “=” sign. It can be 1, 2 or 0.
Second solution to the problem
If after completing the first step the error continues to irritate your nerves, try the following steps:
- We look for the “VideoSettings.ini” file in the game directory;
- Open it with the standard program notepad or “notepad++”;
- We are looking for the lines 0 = Windowed, 1 = Fullscreen (default), 2 = Windowed Fullscreen;
- Change their digital value in the radius from “0” to “1”;
- Save the file after editing and close it.
After completing the above steps, the problem should be resolved. The main thing is not to violate the file structure.
Third solution to the error
There are circumstances where no amount of editing the game's system files will fix the problem. But as they say, the most difficult thing is the elementary. But prepare yourself for the fact that the game will be a little uncomfortable, but as they say, better bad than nothing at all! And so, in order for your favorite toy to stop closing, all you need to do is turn it on windowed mode. After turning on the mode, crashes will partially or completely stop.
I see that this method seemed crazy to you. But you are deeply mistaken. This advice helped solve this kind of problem for seventy percent of users in whom this incident arose. At the same time, it is worth noting that this decision applies not only to Splinter cell blacklist, but also to other gaming creations.
Fourth solution to the error
Not always relevant, but very effective method fixing most of the problems with many games, not excluding Splinter cell blacklist. We will now talk about the well-known DirectX. I think you already guessed what needs to be done with it. Right! Update and reboot your machine.
The fifth way to fix an error with the game
And finally the last way to eliminate Splinter departures cell blacklist and more is – updating your video card drivers. You should not ignore this step, as it carries many corrections both in the operation of the computer itself and in programs and toys. To update your video card drivers, follow these steps.
